Konica Minolta AccurioLabel 230, Quick Manual, Page: 56 / 194

3-22 AccurioLabel 230
Before printing 3 3.1
6
Measure the length of the lines indicated by the numbers from [1] to [8] ([5] and [7] are omitted.) on the
printed chart.
% For [1] and [3], measure the length from the vertical line to the edge of the media.
%
The figure shows an example when measuring lines [1] and [6].
%
You can enter values in increments of 0.1 mm.
%
Be sure to write down the measured value.
7
Press the number indicating each point and use the touch panel keypad, [
,
] or [
+
] to enter the meas-
ured value.
%
Press [Clear] to reset the value.
8
Press [Adjustment Start].
The "Registration Adj." screen is displayed.