Konica Minolta AccurioLabel 230, Quick Manual, Page: 93 / 194

AccurioLabel 230 4-25
4.3 Replacing the media 4
5
Set the new media in the unwinder spindle.
4.3.2 Connect the media using the workbench
1
Insert the tip of the new media into the workbench through outside the rollers 1 and 2.
%
For the positions of the rollers 1 and 2, refer to page 4-8.
2
Put the rear end of the cut media on the front end of the media to join, and then fix it with four magnets.