Konica Minolta AccurioLabel 230, Quick Manual, Page: 74 / 194

4-6 AccurioLabel 230
Setting media 4 4.2
5
Using a lifter, adjust the center of the media core and unwinder spindle.
6
Set the media in the unwinder spindle.
%
Set the media so that it can be pulled out counterclockwise as shown in the following figure.
NOTICE
Note that if Roll Winder RW-110 is subjected to a strong shock, the installation location may become
misaligned and cause media meandering.
When setting the media, if it is stuck at the rear side and cannot be pushed, slightly raise the rear side
of the media and move.
Set the media with its edge adjusted with the position of 330 mm/12.99 " of the scale on the unwinder
spindle.