Konica Minolta AccurioLabel 230, Quick Manual, Page: 171 / 194

AccurioLabel 230 6-21
6.5 A media feeding error occurs 6
5
Open the top cover of the leading section of the main body of the printer and confirm that the media
passes through the center position of the leading section.
% If the positions are misaligned, correct the position by confirming both scales of the leading section.
6
Close the top cover of leading section.
7
Open the cover of the web guide of Roll Winder RW-210 and press the center positioning key.
8
Adjust the position of the sensor unit to make the value of the web guide ±0.0.
%
Loosen the upper knob of the web guide to move the sensor unit back and forth.
%
When you move the sensor unit to the front and to the back, the value is changed to the minus and
plus directions, respectively.
%
After adjustment, tighten the knob to fix it.
9
Press the manual mode key.
+1.7
M
20.0 0.0
0.0
M
20.0 0.0
0.0
M
20.0 0.0