Konica Minolta AccurioLabel 230, Quick Manual, Page: 41 / 194

AccurioLabel 230 3-7
3.1 Before printing 3
7
Press [Start] on the "Stop" screen.
The screen switches to the "Run" screen and the mark and color of [Start] switches.
The message "Rewinder picking up web" is displayed and the media is conveyed.
NOTICE
If the message "Safety door open" is displayed on the "Stop" screen, inspect the doors and covers of
Roll Winder RW-110 or Roll Winder RW-210 . When you close all the doors and covers, the message
is not displayed anymore.
If "Torque too high, reduce tension or increase taper" is displayed and the media is not conveyed, con-
firm that the value of "Rew Tension Pot" on the "Debug/Settings" screen is "200".
Confirm that the speed adjustment dial at the bottom right of the control panel is 10.
8
Confirm that the value of "Web Speed" switches to "0m/min".
9
Confirm the MACHINE screen on the touch panel and press [Start Convey].
%
Confirm that the status of Roll Winder RW-110 / Roll Winder RW-210 is displayed in blue.