Konica Minolta AccurioLabel 230, Quick Manual, Page: 143 / 194

AccurioLabel 230 5-19
5.3 Weekly cleaning 5
5
Set the tips of the media to the main body along the guide plate.
%
Confirm with the scale of the leading section that the media passes through the center position of
the leading section .
NOTICE
Do not set the leading edge of the media to the main body before turning ON the machine. If the leading
edge of the media is set before the machine is turned ON, the J-1755 JAM code is displayed when the
machine is turned ON.
6
Feed the media into the inside of the main body until [Start Convey] on the MACHINE screen on the
touch panel on the main body lights.
NOTICE
Stop feeding the media when [Start Convey] lights. Auto stop may not work after pressing [Start Convey]
if the leading edge of the media reaches near the main body exit.