Konica Minolta AccurioLabel 230, Quick Manual, Page: 165 / 194

AccurioLabel 230 6-15
6.4 Clearing paper jams 6
7
Move the lever [M1] to the left, then pull out the ADU .
8
Open the cover [M2] and cover [M3] and check for adhesive sticking or paper remaining inside the
machine.
%
If any adhesive sticks to the parts, clean inside the machine.
Check if adhesive peeled from the pasted part and stuck to the
guide plate as well as adhesive run-
ning off the edge of the media.
%
If paper remains, remove it.
%
If the JAM code [J-3112] is displayed, check if the centering sensor located behind the cover [M3]
is clean.
9
Confirm that the leaf spring (back) and leaf spring (front) do not come off.
%
If they come off, refer to page 5-12 and reattach them.
DO NOT put your hand into the fixing part of the fixing unit .
%
Otherwise, you may get burned. Be especially careful when pulling out the fixing unit or opening
the fixing part.