Konica Minolta AccurioLabel 230, Quick Manual, Page: 59 / 194

AccurioLabel 230 3-25
3.2 Job printing 3
3.2.2 Step 2: Send print data
Send a print job to the HDD of the main body using the printer driver to temporarily save it as a hold job.
Saving a job temporarily allows test printing or fine adjustment on the machine.
1
Open the file menu of the application software, then click [Print] to display the print window.
2
Select the installed printer driver from [Printer], then click [Properties].
3
Click the [Workflow] tab and select [Hold] from the pull-down menu of [Output Method].
4
Click [Print].
The job is sent and saved.
3.2.3 Step 3: Print test pages
Print test pages from the "Hold Job" screen.
This section describes the procedure for stopping the printed image near the delivering section and visually
checking the image immediately.
Tips
-
If you want to combine several jobs to print test pages, insert or copy using the [Call Insert Job] tab in
the "Image Page Edit" screen and delete any unnecessary pages, edit the pages for test printing. For
details, refer to the [User's Guide].
- If you are not particular about the accuracy of a print position, you can shorten the distance to cut back
on the consumption. For details, refer to the [User's Guide].
1
Press [Stop Position 3] for [Print Stop Change Setting] on the [MACHINE] tab on the touch panel of the
main body.
The default value of the print stop position of [Stop Position 3] is set to 0 cm. If [Stop Position 3] is se-
lected, printed image stops near the delivering section.
The default values of the print stop positions of [Stop Position 1] and [Stop Position 2] are set to 800 cm
and 90 cm, respectively.
NOTICE
You can adjust the paper stop position after printing in [Adjustment] > [Machine Adjustment] > [Printer
Adjustment] > [Print Stop Position] on the MACHINE screen.