Konica Minolta AccurioLabel 230, Quick Manual, Page: 58 / 194

3-24 AccurioLabel 230
Job printing 3 3.2
3.2 Job printing
3.2.1 Step 1: Prepare print data
Prepare print data.
Observe the following precautions when printing data.
Available data size is up to 320 mm (width) x 480 mm (length) / 12.60" (width) x 18.90" (length). (1195 mm /
47.05" for Banner)
-
Minimum data size is 90 mm (width) x 115 mm (length)/3.54" (width)
e
4.52" (length). When printing la-
bels smaller than 90 mm (width) x 115 mm (length)/3.54" (width) x 4.52" (length), allocate several lines
or rows of labels in a page.
-
When printing eye marks, put them within the maximum print range mentioned above.
-
Allocate labels so that the top (A) and bottom (C) margins are 0 mm / 0" respectively. When allocating
several lines in a page, ensure a 1 mm / 0.04" space (B) between each line.
- When printing several pages, a 1 mm / 0.04" space is automatically inserted between each page.
Tips
- If you need margins (B) wider than 1 mm / 0.04" between each line of data, adjust the margins so that
the total of the top margin (A), bottom margin (C), and 1-mm / 0.04" page margin (to be inserted auto-
matically) becomes the value of the margin (B).
-
Example: When obtaining a 5 mm / 0.2" margin for margin B:
Set 2 mm / 0.08" margins for the top (A) and bottom (C).
Top margin (A): 2 mm + Bottom margin (C): 2 mm + 1 mm (to be inserted automatically) = Margin be-
tween data (B): 5 mm / Top margin (A): 0.08" + Bottom margin (C): 0.08" + 0.04" (to be inserted auto-
matically) = Margin between data (B): 0.2"
Printable range 240 mm/9.44
"
Paper width 330 mm/12.99
"
C = 0 mm
B = 1 mm
A = 0 mm
Page area