Konica Minolta AccurioLabel 230, Quick Manual, Page: 186 / 194

7-8 AccurioLabel 230
Name of each component 7 7.1
7.1.2 Roll Winder RW-110
External machine items
No. Name Description
1 Front door (safety door) handle Pulled to the right to open the front door (safety door) .
2 EMERGENCY STOP Press to stop this system in emergency. Use only in case
of emergency.
To release the emergency stop status, turn the knob of
EMERGENCY STOP to the right to return the button to its
original position.
Do not use it to stop normal printing. It may result the ma-
chine and media being damaged.
3 Web guide cover Protects the web guide . Remove it to operate the web
guide .
4 Safety cover Protects the rollers in Roll Winder RW-110 . Opened when
setting or replacing the media. If it opens during the media
conveyance or print, the machine stops in emergency.
5 Workbench When replacing the media, cut the media with following the
cutter groove on the
workbench . Four magnets for fixing
the media are included.
6 Safety cover Protects the rollers in Roll Winder RW-110 . Opened when
setting or replacing the media. If it opens during the media
conveyance or print, the machine stops in emergency.
7 Unwinder spindle Sets the media.
8 Remaining media sensor Detects the winding diameter of the media. When the
winding diameter falls below the detection range of the
re-
maining media sensor , the media conveyance stops. The
default detection range is set to 9 mm, which is the clear-
ance between the unwinder spindle and sensor.
9 Front door (safety door) Protects the rollers in Roll Winder RW-110 . Opened when
setting or replacing the media.