Konica Minolta A0FD011 User Manual Download

Page: 260 / 286

Status, Error, and Service Messages

248

THE PARTY IS FULL

The maximum num-
ber of 236 destina-
tions for the scan
data has been
reached.

Send the data, and
then try scanning
again. Otherwise,
delete unnecessary
destinations before
adding the desired
ones.

TONER EMPTY

CHANGE x TONER

The indicated toner
cartridge has
become empty.
(This message
appears if

TONER

EMPTY STOP

the MACHINE SET-
TING menu is set to
ON.)

Replace the indicated
toner cartridge.

Toner Low x

The indicated toner
cartridge is low and
should be replaced
within 200 pages at
5% coverage of Let-
ter/A4 paper.

Prepare the indicated
toner cartridge.

Trans. Belt Life

The time to replace
the transfer belt unit
has been reached.

Replace the transfer
belt unit.

Trans. Roll. Life

The time to replace
the transfer roller
has been reached.

Replace the transfer
roller.

TRAYx OPEN

CLOSE TRAYx

The indicated paper
tray is open.

Close the indicated
paper tray.

USB Dev. Not support

A USB device
incompatible with
this machine is con-
nected.

Disconnect the USB
device from this
machine.

USB Hub Not support

A USB hub is con-
nected to this
machine.

This machine is not
compatible with a USB
hub. When connecting
USB cables to this
machine, do not use a
USB hub.

This message...

means...

Do this...

Summary of Contents for A0FD011































































































































































































































































































Search results

Summary of Contents for A0FD011

Reviews:

Related manuals for A0FD011

Brands by name

Popular brands

Konica Minolta A0FD011, User Manual

Search results

Summary of Contents for A0FD011

Reviews:

Related manuals for A0FD011

Brands by name

Popular brands