Konica Minolta A0FD011, User Manual

Page: 201 / 286

Maintaining the Machine
189
„ Do not cover the machine immediately after using it. Turn it off and wait
until it cools down.
„ Do not leave the machine’s covers open for any length of time, especially
in well-lit places; light may damage the toner cartridges.
„
Do not open the machine during printing.
„
Do not tap media stacks on the machine.
„ Do not lubricate or disassemble the machine.
„ Do not tilt the machine.
„ Do not touch the electrical contacts, gears, or laser devices. Doing so may
damage the machine and cause the print quality to deteriorate.
„ Keep media in the output tray at a minimum level. If the media is stocked
too high, your machine may experience media misfeeds and excessive
media curl.
„ Make sure two people are avail-
able to lift the machine when
moving it.
Keep the machine level to avoid
toner spillage.
„ When lifting the machine, fold up
Tray 1 and remove the output
tray, and then lift the machine as
shown in the illustration at the
right.
„ If the output tray and lower
feeder unit are installed, remove
them from the machine and
move each part separately.
„ If you get toner on your skin,
wash it off with cool water and a mild soap.
CAUTION
If you get toner in your eyes, wash it out immediately with cool water
and consult a doctor.
„ Make sure any parts removed during cleaning are replaced before you
plug in the machine.
55 kg
121 lbs 121 lbs