Konica Minolta A0FD011 User Manual Download

Page: 256 / 286

Status, Error, and Service Messages

244

DISCONNECT

USB Memory

The connection to
the USB memory
device was inter-
rupted.

Check the connection
to the USB memory
device, and then try
sending the fax again.

DISCONNECT

xxx Server

The connection to
the server was inter-
rupted.

Check the settings
specified in the NET-
WORK SETTING and
E-MAIL SETTING
menus, and then try
sending the data
again.

Fuser Unit Life

The time to replace
the fuser unit has
been reached.

Replace the fuser unit.

I-UNIT END

REPLACE x

The time to replace
the indicated imag-
ing unit has been
reached.

Replace the indicated
imaging unit.

I-Unit End x

The time to replace
the indicated imag-
ing unit has been
reached.

Replace the indicated
imaging unit.

I-Unit Life (x)

The time to replace
the indicated imag-
ing unit has been
reached.

Replace the indicated
imaging unit.

I-Unit Low x

The indicated imag-
ing unit is low and
should be replaced
within 200 pages at
5% coverage of Let-
ter/A4 paper.

Prepare the indicated
imaging unit.

INCORRECT TONER

CHANGE x TONER

The indicated toner
cartridge is not cor-
rect.

Replace the indicated
toner cartridge with a
correct one.

INCORRECT PAPER SIZE

CHANGE xxx

→

xxx

The paper size set
in the tray is not cor-
rect.

Follow the message
and replace the paper.

This message...

means...

Do this...

Summary of Contents for A0FD011































































































































































































































































































Search results

Summary of Contents for A0FD011

Reviews:

Related manuals for A0FD011

Brands by name

Popular brands

Konica Minolta A0FD011, User Manual

Search results

Summary of Contents for A0FD011

Reviews:

Related manuals for A0FD011

Brands by name

Popular brands