Konica Minolta A0FD011, User Manual

Page: 101 / 286

About Duplex Printing
89
About Duplex Printing
Duplex (double-sided) printing can be done with magicolor 4690MF, which
has the duplex unit built in as a standard. If the paper has low opacity (high
translucency), then the printed data from one side of the page will show
through to the other side. Check your application for margin information. For
best results, print a small quantity to make sure the opacity is acceptable.
Note
Only plain paper, 60–90 g/m
2
(16–24 lb bond) can be autoduplexed. See
“Specifications” on page 66.
Duplexing envelopes, labels, letterheads, postcards, thick stock, glossy
media or transparencies is not supported.
How do I autoduplex?
Check your application to determine how to set your margins for duplex
(double-sided) printing.
The following Binding Position settings are available.
If “Short Edge Binding” is selected, the pages will be laid
out to flip at the top.
If “Long Edge Binding” is selected, the pages will be laid out
to flip at the side.
1
3
1
2
1
1 1
1
1
2
3