TROUBLES AND ACTIONS
OPERATION
3-154
Electronic Control System
3
If an error code is displayed on the machine monitor display, follow the self-diagnostic remedy table below.
Machine Monitoring System
(*): For details of handling the emergency pump drive switch and swing holding brake cancel switch, see
“SWITCHES (3-34)“.
Monitor
display
Failure mode
Remedy
E03
Swing brake system error
Turn the swing holding brake release switch is up to
release the brake. When applying the swing brake, oper-
ate it manually with the swing lock switch. Depending on
the cause of the problem, it may not be possible to
release it. In any case, have it inspected immediately.(*)
E07
Error in pump controlling system
(Emergency safeguard system in action)
An abnormality has occurred in the electronic pump con-
trol system, and the emergency safeguard system is in
action. Part of the machine's functions is lost. The ordi-
nary work is still possible with the machine, but ask your
distributor for an inspection.
E10
Abnormality in electronic governor system
(engine stopped)
Carry out inspection immediately.
E11
E14
Abnormality in electronic governor system
(abnormality in engine protection output)
Abnormality in throttle
(abnormality in fuel control dial)
It is possible to carry out normal working operations, but
have inspection carried out immediately.
Move machine to a safe posture, and carry out inspection
immediately.
E15
Abnormality in electronic governor system
It is possible to carry out normal driving operations, but
have inspection carried out immediately.
E0E
Abnormality in network
•If the engine can be operated, set the machine to a safe
posture, then have inspection carried out immediately.
•If the engine is operated and stalls, turn the emergency
pump drive switch is up set the machine to a safe pos-
ture, then have inspection carried out immediately.
•Even if the engine is stopped, have inspection carried
out immediately.
If no error code is displayed but work equipment or
swing cannot be operated
Carry out inspection immediately.
Summary of Contents for Galeo PC800LC-8
