Komatsu Galeo PC800LC-8, Operation & Maintenance Manual

Page: 98 / 318

DETAILED CONTROLS AND GAUGES
OPERATION
3-34
SWITCHES 3
Starting Switch
Starting switch (1) is used to start or stop the engine.
(A): OFF position
The key can be inserted or withdrawn. Switches for the electri-
cal system (except room lamp), are all turned off and the
engine is stopped.
(B): ON position
Electric current flows through the charging and lamp circuits.
Keep starting switch key in the ON position while the engine is
running.
(C): START position
This is the engine-start position. Keep the key at this position
during cranking. Immediately after starting the engine, release
the key. It will automatically return to the ON position (B).
(1) Starting switch (10) Emergency pump drive switch
(2) Fuel control dial (11) Swing brake cancel switch
(3) Cigarette lighter (12) Rotating lamp switch (if equippedÅj
(4) Lamp switch
(13)
Large capacity airflow air conditioner blower
switch (if equipped)
(5) Swing lock switch
(6) Machine push-up switch
(14)
Lower wiper switch
(7) Boom shockless control switch (Fixed front window cab specification)
(8) Horn switch (if equipped)
(9) Room lamp switch (15) Step light switch