Komatsu Galeo PC800LC-8, Operation & Maintenance Manual

Page: 46 / 318

SAFETY MACHINE OPERATION
SAFETY
2-22
SAFETY MACHINE OPERATION 2
STARTING ENGINE 2
If there is a warning tag hanging from the work equipment con-
trol lever, do not start the engine or touch the levers .
CHECKS BEFORE STARTING ENGINE
Carry out the following checks before starting the engine at the beginning of the day's work.
q
Remove all dirt from the surface of the window glass to ensure a good view.
q
Remove all dirt from the surface of the lens of the working lamps, and check that they light up correctly.
q
Check the coolant level, fuel level, and oil level in engine oil pan, check for clogging of the air cleaner, and
check for damage to the electric wiring.
q
Adjust the operator's seat to a position where it is easy to carry out operations, and check that there is no dam-
age or wear to the seat belt or mounting clamps.
q
Check the operation of the instruments and gauges, check the angle of the mirror, and check that the control
levers are all at the Neutral position.
q
Before starting the engine, make sure that the lock lever is in the LOCK position.
q
Adjust the mirrors so that the rear of the machine can be seen clearly from the operator's seat.
When adjusting, see “Rearview Mirrors (3-87)“.
q
Check that there are no persons or obstacles above, below, or in the area around the machine.
SAFETY RULES FOR STARTING ENGINE
q
When starting the engine, sound the horn as a warning.
q
Start and operate the machine only while seated.
q
Do not allow anyone apart from the operator to ride on the machine.
q
Do not attempt to start the engine by short-circuiting the engine starting circuit. Such an act may cause a seri-
ous bodily injury or fire.