Komatsu Utility 69001, Operation & Maintenance Manual

Page: 93 / 276

OPERATION
EXPLANATION OF COMPONENTS
3-39
q
Pitch control
After moving the lever to the neutral position without fail, tilt the
blade while pressing any of the switches (M) in the center of
the knob. Then the angle of the blade edge changes.
(B) Hold: The blade stops and holds a stationary posture.
(G) Rear pitch: Blade edge angle small
(H) Front pitch: Blade edge angle large
q
Precautions when using pitch control
When using the pitch operation, the tilt operation changes as
follows.
(G)
(H)
(J)
(K)
Rear pitch
Front pitch
Pitch gauge
Standard pitch
Pitch condition Tilt operation
D65EX D65PX D65WX
Amount of tilt
Max. forward
pitch Only left tilt
operation is possible
Max. 870 mm Max. 890 mm Max. 820 mm
Forward pitch (H)
Both left and right tilt
operations are possi-
ble
Compared with standard:
LEFT tilt is LARGER
RIGHT tilt is SMALLER
Standard pitch
(K) 460 mm
(both left and right)
450 mm
(both left and right)
410 mm
(both left and right)
Rear pitch (G)
Compared with standard:
LEFT tilt is SMALLER
RIGHT tilt is LARGER
Max. rear pitch
Only right tilt
operation is possible
Max. 870 mm Max. 890 mm Max. 820 mm