Komatsu Utility 69001, Operation & Maintenance Manual

Page: 161 / 276

OPERATION
TRANSPORTATION
3-107
1. Stop the engine and set the parking brake lever to the
LOCK position (L) securely.
2. Set the work equipment lock lever to the LOCK position (L)
securely.
3. Install wire ropes, slings, etc. matched to the weight of the
machine to the lifting points as shown in the above figure.
NOTICE
q
Use protectors, etc. so that the wire ropes will not be
broken at sharp edges or narrow places.
q
Use spreaders and bars having sufficient width so that
they will not touch the machine.
4. After setting the wire ropes, lift up the machine and stop at 100 to 200 mm above the ground, and check that
the wire ropes are not slack and the machine is level, then lift up slowly.
TRAVELING ON ROADS 3
q
When traveling on paved roads, use flat shoes to protect their surface.
Even when travelling a short distance, always place boards to protect the road surface.
REMARK
Note that the asphalt road becomes soft in summer.