Komatsu Utility 69001, Operation & Maintenance Manual

Page: 235 / 276

MAINTENANCE
SERVICE PROCEDURE
4-57
EVERY 1000 HOURS SERVICE 4
Maintenance for every 50, 250 and 500 hours should be carried out at the same time.
REPLACE FUEL MAIN FILTER CARTRIDGE 4
Carry out this operation after carrying out the maintenance in the “REPLACE FUEL PRE-FILTER CARTRIDGE (4-
54)“ for every 500 hours.
WARNING
q
After the engine has been operated, all parts are at high temperature, so do not replace the filter imme-
diately. Wait for all parts to cool down before starting the operation.
q
High pressure is generated inside the engine fuel piping system when the engine is running.
When replacing the filter, wait for at least 30 seconds after stopping the engine to let the internal pres-
sure go down before replacing the filter.
q
Do not bring any fire or flame close.
NOTICE
q
Genuine Komatsu fuel filter cartridges use a special filter that has highly efficient filtering ability.
When replacing the filter cartridge, always use a genuine Komatsu part.
q
The common rail fuel injection system used on this machine consists of more precise parts than the
conventional injection pump and nozzle.
If any part other than a genuine Komatsu filter cartridge is used, dust or dirt may get in and cause
problems with the injection system. Always avoid using substitute parts.
q
When carrying out inspection or maintenance of the fuel system, pay more attention than normal to
the entry of dirt. If dirt is stuck to any part, use fuel to wash it off completely.
Prepare a filter wrench and a container to catch the fuel.
1. Open the inspection cover at the bottom of the fuel tank.
2. Close fuel tank valve (1).