Komatsu Utility 69001, Operation & Maintenance Manual

Page: 154 / 276

TRANSPORTATION
OPERATION
3-100
TRANSPORTATION 3
When transporting the machine, observe all related laws and
regulations, and be careful to assure safety.
TRANSPORTATION MEANS 3
When transporting the machine, choose the optimum transportation method in reference to the weight and dimen-
sions shown in “SPECIFICATIONS (5-2)“. Note that machine specifications (weight and dimensions) vary depend-
ing on the kind of track shoes and blades.
REMOVING CAB 3
If it is necessary to remove the cab for transportation, there is danger that the seal may be damaged when remov-
ing or installing the cab, so please contact your Komatsu distributor.
When installing the cab, please contact your Komatsu distributor, too.
PRECAUTIONS WHEN REMOVING WORK EQUIPMENT 3
If there is any pressure remaining in the tilt piping after the work equipment has been removed, it may be difficult to
remove the quick coupler of the tilt hose, so remove the work equipment as follows.
1. Lower the blade to the ground and set it horizontal to the
ground surface.
REMARK
If the blade is tiled, the tilt piping will be under internal pressure,
so set the blade horizontal to the ground.
2. Remove the quick coupler (1), then remove the work
equipment assembly.