Komatsu Utility 69001, Operation & Maintenance Manual

Page: 79 / 276

OPERATION
EXPLANATION OF COMPONENTS
3-25
REMARK
To return to the maintenance mode, operate the buzzer cancel
switch to
t
.
METHOD OF USING PM CLINIC AUXILIARY MODE
CAUTION
When moving the work equipment or setting the transmission to the travel position for carrying out mea-
surements, check carefully that the situation is safe.
In the PM Clinic auxiliary mode, the engine RPM and battery voltage are shown in display B (multi-information).
Display panel B (Malti-information) displays the item on the top
line (1) and the measured value on the bottom line (2).
The display items consist of the seven items in the table below.
The items can be selected by operating the information switch (<, >).
REMARK
Items such as the engine speed fluctuate and are difficult to see during the measurement. In such cases, operate
the buzzer cancel switch to
U
. This makes it possible to hold the display of the value.
To cancel this mode, operate the buzzer cancel switch again to
U
.
To return to the maintenance mode, operate the buzzer cancel switch to
t
.
Display Item Measured value
01-ENG SPEED Engine rotation speed Rotation (rpm)
02-COOLANT TEMP.
Engine cooling water tem-
perature
Temperature (°C)
05-BOOST PRESS. Boost pressure Pressure (kPa)
06-BOOST TEMP. Boost temperature Temperature (°C)
07-T/C TEMP. Power train oil temperature Temperature (°C)
08-HYD TEMP.
Work equipment oil temper-
ature
Temperature (°C)
13-BATTERY VOLT. Battery voltage Voltage (mV)