Komatsu Utility 69001, Operation & Maintenance Manual

Page: 116 / 276

OPERATION
OPERATION
3-62
2. Set the steering, forward-reverse, gear shift lever in the
REVERSE position (R).
The alarm must sound immediately at this time. The alarm
keeps sounding until the steering, forward-reverse, gear
shift lever is set to the NEUTRAL position (N) or FOR-
WARD position (F).
ADJUSTMENT 3
ADJUST OPERATOR'S SEAT
WARNING
When adjusting the position of the operator's seat, always set the work equipment lock lever to the LOCK
position to prevent any accidental contact with the control levers.
q
Always adjust the operator's seat before starting each operation or when the operators change shift.
q
When adjusting the seat, put your back against the backrest and adjust to a position where the brake pedal
can be fully depressed.
(A) Fore-and-aft adjustment
Pull lever (1), set the seat to a position where it is easy to oper-
ate, then release the lever.
Fore-aft adjustment: 160 mm (8 stages)
(B) Weight adjustment of seat
Turn knob (2) under the seat to match the weight adjustment
scale with your own weight.
The weight can be adjusted to 50 to 120 kg.
REMARK
If you want to make the seat softer, turn the weight adjustment
to a lower weight; if you want to make the seat harder, adjust to
a higher weight. When operating on uneven surfaces, adjust
the seat to a harder setting.
(C) Adjust reclining angle
Pull up lever (3) and set the seat back to a position which is
comfortable for operation, then release the lever.
Sit with your back against the seat back when adjusting. If your
back is not touching the seat back, the seat back may suddenly
move forward.