Kohler KD-150, Owner'S Manual

Page: 57 / 307

9-2 Style Play operating mode
The DIRECT FD bank
content. Move the “!123.SET” folder to the first line of
the display.
9.
Press ENTER twice to save the banks.
10. Load other Styles into the USER01-USER03 banks. Save
them onto the “!456.SET” folder.
11.
Load other Styles into the USER01-USER03 banks. Save
them onto the “!789.SET” folder.
THE DIRECT FD BANK
In addition to the internal memory and DIRECT HD Styles,
you can have DIRECT FD Styles, directly accessed by the
floppy disk.
Just insert a disk, and press the DIRECT FD Style bank. The
disk drive will read the first (in alphabetical order) “.SET”
folder in the floppy disk, and will give you direct access to the
Styles it contains (no loading required).
Note: Reading from floppy disk may take some time, before the
Styles appear on the display.
Browse through the DIRECT FD Styles using the PAGE but-
tons. You can have up to 6 pages, and up to 48 DIRECT FD
Styles in a disk.
Note: Reading from floppy disk is slower than reading from the
internal memory or the hard disk. So, there is a chance that you
will have to wait a few seconds before the selected DIRECT FD
Style is ready to play. The Style will enter at the next beginning
of measure.
How to make the DIRECT FD bank
To configure the DIRECT FD bank, save your Styles into the
first folder in the floppy disk. Folders are read in alphabetical
order.
Note: The following procedures requires you overwrite the User
Style banks. Save these banks before proceeding, to avoid loosing
important data.
1. Insert the floppy disk into the disk drive.
2.
Press DISK and go to the Load page.
3. Use the F1 (Disk device) button to select the FD (Floppy
Disk) device.
4.
Load three banks of Styles, to be transformed into the
DIRECT FD bank.
5. Go to the Save page.
6.
While the “ALL” item is selected, press F3 (Open) to
open it.
7.
Use the E-F (Scroll Up) and G-H (Scroll Down) VOL-
UME/VALUE buttons (or the TEMPO/VALUE section
controls) to move the “STYLE” item to the first line of
the display, and press F2 (Save).
8.
Select the floppy disk (FD) as the target, using the F1
button.
9.
The floppy disk directory appears. Use the E-F (Scroll
Up) and G-H (Scroll Down) VOLUME/VALUE buttons
(or the TEMPO/VALUE section controls), to scroll the
disk content. Move the first folder of the directory to the
first line of the display.
10.
Press ENTER twice to save the banks.
Folder DIRECT FD pages
*.SET > STYLE > USER01 1, 2
*.SET > STYLE > USER02 3, 4
*.SET > STYLE > USER03 5, 6
NEWNAME.SET |
LIVE.SET
ETHNICA.SET |
FD LOAD OPEN CLOSE
Disk:Load
ALL
FD SAVE OPEN CLOSE
Disk:Save