manualshive.com logo in svg

Kohler KD-150, Owner'S Manual

Share
Download
Kohler KD-150 Owner'S Manual Download Page 161

15-6

Global edit environment

Page 11 - MIDI OUT Channels

0…127

Control Change message #0…127. See “MIDI
Controllers” on page 20-1 for a list of available
Control Change messages.

PAGE 11 - MIDI OUT CHANNELS

In this page, you can assign to any MIDI OUT channel one of
KD’s tracks. Use the TRACK SELECT button to switch from
channels 1-8 to channels 9-16.

Channel

You can assign to each channel one of the following tracks:
(Off)

No track assigned.

Lower

Lower track.

Upper1…3

One of the Upper tracks.

Drum

Drum track.

Perc

Percussion track.

Bass

Bass track.

Acc1…5

One of the Auto-accompaniment tracks.

S1 T1…16

One of Sequencer 1 tracks.

S2 T1…16

One of Sequencer 2 tracks.

SQ Tr01…16 Use these channels to send data generated by a

track with the same name on either or both
onboard sequencers at the same time.

Chord

Use this channel to send notes recognized by
the Chord Recognition engine to the MIDI
OUT. This is useful, for example, to control an
external Harmonizer from the KD, using the
Lower track to play chords, even if the track is
in mute.

PAGE 12 - MIDI OUT FILTERS

Use this page to set up to 8 filters for the MIDI data sent by
the KD.

Filters

Selected MIDI OUT filters.
Off

No filter.

Pitch Bend

Pitch Bend.

MonoTouch Mono (or Channel) After Touch.
PolyTouch

Poly After Touch.

PrgChange

Program Change.

SysExcl

System Exclusive.

All CC

All Control Change messages.

0…127

Control Change message #0…127. See “MIDI
Controllers” on page 20-1 for a list of available
Control Change messages.

PAGE 13 - AUDIO OUTPUT CONFIGURATION

This page lets you connect a “virtual output” (i.e., a track
sound generation, or an effect processor’s output) to a physi-
cal output (the output connectors on the back of the instru-
ment).

Virtual output

Select this parameter and use the TEMPO/VALUE controls to
select a virtual output.
Upper1…Lower

Signal from the Realtime (Keyboard) tracks.
This is the sound generation connected to the
selected track.

Pad1…4

Signal from the Pads. This is the sound genera-
tion connected to the selected Pad.

Drum…Acc5

Signal from the Style tracks. This is the sound
generation connected to the selected track.

S1-Tr01…S2-Tr16

Signal from the Sequencer tracks. This is the
sound generation connected to the selected
track.

In1-IntFX
In2-IntFX

Signal from the Audio Inputs 1 and 2, routed
to the Internal FX processors. The “Input 1/2”
parameter shall be set to “1/2 Int.FX” (see
“Input 1/2” on page 15-7).

Ch01:Upper1 Ch05:Upper3

Ch02:Lower  Ch06:Acc1

Ch03:Bass   Ch07:Acc2

Ch04:Upper2 Ch08:Acc3

Gbl:Midi Out Chnl

SysEx       PitchBend

MonoTouch   Off

0 Bank Sel. Off

1 Mod1 (Y+) Off

Gbl:MidiOut Flt.

Upper1:    Left&Right

Drum mode: DrumCatheg.

Kick Drums:Output1

Gbl:AudioOut Cfg

Virtual output

Physical output

Drum category

Physical output

Internal FX

IN 1

OUT 1

Internal FX

IN 2

OUT 2

Summary of Contents for KD-150




















































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands