manualshive.com logo in svg

Kohler KD-150, Owner'S Manual

Share
Download
Kohler KD-150 Owner'S Manual Download Page 164

15-9

Global edit environment

Page 17 - Vocal/Guitar Mode (KD160/165)

PAGE 17 - VOCAL/GUITAR MODE (KD160/165)

In this page you can select the Vocal/Guitar Processor Board
operating mode (KD160/165). The pedal and slider settings
on this page are only effective if you select the Vcl/GtrSwitch
or IntFXCtl options on “Page 4 - Assignable Pedal/Foot-
switch, Assignable Slider, EC5”.

Note:

 The “Input 1/2” parameter must be set to “1/2 Vocal/

Gtr”. At least one channel should be sent to the Vocal/Guitar
Processor Board.

Mode

Selects the operating mode of the Vocal/Guitar Processor
Board. Parameters on the following pages are different,
according to the selected mode.
Vocal

Select this mode when you are connecting a
microphone to the Audio Inputs. While in this
mode, you have access to vocal effects and a
Vocal Harmonizer. The available fixed effects
are Harmonizer, Tone, Compressor; plus, there
are the freely selectable FX1 and FX2 effects.

Guitar

Select this mode when you are connecting a
guitar to the Audio Inputs. While in this mode,
you are supplied with guitar effects.

AssignPdl (Assignable Pedal) (Vocal mode)

Vocal/Guitar FX parameter assigned to the Assignable Pedal,
when the Mode = Vocal.

AssignSld (Assignable Slider) (Vocal mode)

Vocal/Guitar FX parameter assigned to the Assignable Slider,
when the Mode = Vocal. For a list of assignable parameters,
see the parameter list for the Assignable Pedal above.

Assign Sw1 (Assignable Switch 1) (Vocal mode)
Assign Sw2 (Assignable Switch 2) (Vocal mode)

Vocal/Guitar FX parameters assigned to the Assignable Foot-
switch, wEC5 pedal, or Pad, when the Mode = Vocal.

AssignPdl (Assignable Pedal) (Guitar mode)

Vocal/Guitar FX parameter assigned to the Assignable Pedal,
when the Mode = Guitar.

Mode:Vocal

AssignPdl:HarmonyVol

Assign:Sld:FXSend

AssignSw1:Vcl/GtMute  |

Gbl:Vocal/Guitar

Mode:Guitar           |

AssignPdl:Hall Level

Assign:Sld:Hall Time

AssignSw1:Effect Mute |

Gbl:Vocal/Guitar

Parameter

Meaning

Harmony Vol.

Volume of the Harmonizer.

Lead Volume

Volume of the direct signal (voice 
entering the INPUT connectors).

FX Send

Level of the direct signal sent to the 
effects.

Chor. Speed

Speed of the Chorus effect.

Chor. Depth

Intensity of the Chorus effect.

Chor. Level

Level of the Chorus effect.

Delay Time

Length of the Delay effect.

Delay FBack

Number of repetition of the Delay 
effect.

Delay Level

Level of the Delay effect.

Hall Time

Length of the Hall reverb.

Hall Tone

Tone quality of the Hall reverb.

Hall Level

Level of the Hall reverb.

Room Time

Length of the Room reverb.

Room Tone

Tone quality of the Room reverb.

Room Level

Level of the Room reverb.

Parameter

Meaning

Voc/Gt Mute

Mute of all Input signals going to the 
Vocal/Guitar Processing Board.

FX Mute

Mute of the Vocal/Guitar Processing 
Board effects. The direct signal and 
the Harmonizer can still be heard.

Harm&FX Mute

Mute of the Vocal/Guitar Processing 
Board effects and Harmonizer. The 
direct signal can still be heard.

Harmony Mute

Mute of the Vocal/Guitar Processing 
Board Harmonizer. The direct signal 
and effects can still be heard.

Parameter

Meaning

Ovrdr Gain

Saturation of the Overdrive.

Ovrdr Level

Level of the Overdrive.

Summary of Contents for KD-150




















































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands