manualshive.com logo in svg

Kohler KD-150, Owner'S Manual

Share
Download
Kohler KD-150 Owner'S Manual Download Page 149

14-16

Program operating mode

Page 14 - Amp LFO1

pressure is applied to the keyboard. However if the EG set-
tings etc. have already raised the volume to its maximum
level, the volume cannot be increased further.
With negative (–) values of this parameter, the volume will
decrease when pressure is applied to the keyboard.
-99…+99

Intensity value.

PAGE 14 - AMP LFO1

These parameters let you use “LFO1” (see “Page 17 - LFO1”
on page 14-18) and “LFO 2” (see “Page 18 - LFO2” on
page 14-19) to control the volume of the selected oscillator.

Selected

Use this parameter to select an oscillator to put in edit. Alter-
natively, you can select oscillators using the F1-F4 buttons.

Intensity

This parameter specifies the depth and direction of the effect
that “LFO1” will have on the volume of the selected oscilla-
tor. Negative (–) values will invert the LFO waveform.
-99…+99

Intensity value.

Amplifier LFO1 modulation

AMS (Alternate Modulation Source)

Use this parameter to select a source that will control the
depth by which “LFO1” will modulate the volume of the
selected oscillator. See “AMS (Alternate Modulation Source)
list” on page 14-21.

Intensity

As the absolute value of this setting is increased, the effect of
“AMS” on “LFO1” will increase. Negative (–) values will
invert the LFO waveform.
-99…+99

Intensity value.

PAGE 15 - AMP LFO2

These parameters let you use “LFO1” (see “Page 17 - LFO1”
on page 14-18) and “LFO 2” (see “Page 18 - LFO2” on
page 14-19) to control the selected oscillator volume. See

“Page 14 - Amp LFO1” for more information on parameter’s
editing.

PAGE 16 - AMP EG

These parameters let you create time-varying changes in the
volume of the selected oscillator.

Selected

Use this parameter to select an oscillator to put in edit. Alter-
natively, you can select oscillators using the F1-F4 buttons.

Amp envelope

Start/Attack/Break/Sustain/Release Level

These parameters are the level of the envelope segment.
0…99

Level value.

Start Level

This parameter specifies the volume level at note-on. If you
want the note to begin at a loud level, set this to a high value.

Attack Level

This parameter specifies the volume level that will be reached
after the attack time has elapsed.

Break Level

This parameter specifies the volume level that will be reached
after the decay time has elapsed.

Selected:        Osc1

Intensity:         +0

AMS:      Joystick -Y

Intensity:         +0

Amp LFO1   |Osc1

Selected:        Osc1

Intensity:         +0

AMS:      Joystick -Y

Intensity:         +0

Amp LFO2   |Osc1

Selected:        Osc1

Start Level:      +99

Attack Time:       73

Attack Level:     +95

Amp EG     |Osc1

Note-on

Note-off

Attack
Time

Decay
Time

Release Time

Attack Level

Sustain
Level

Time

Break Point

Start
Level

Slope
Time

Amplifier EG

Volume

Summary of Contents for KD-150




















































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands