manualshive.com logo in svg

Kohler KD-150, Owner'S Manual

Share
Download
Kohler KD-150 Owner'S Manual Download Page 15

 

1-2

Welcome!

Reloading the Factory Data

 

2.

 

Turn off the instrument, and insert the operating system
disk into the disk drive.

 

3.

 

Turn on the instrument. A message appears on the dis-
play, asking if you want to load the operating system.

 

4.

 

Press ENTER to load, or EXIT to cancel the loading pro-
cess. If you press ENTER, wait until the loading is com-
pleted.
When the operating system loading is complete, a mes-
sage appears, asking you to remove the floppy disk and
press any button.

 

5.

 

Remove the floppy disk, and press any button.

 

RELOADING THE FACTORY DATA

 

Should the internal memory get damaged, you can reload the
original Factory Data from the backup disks. See “Restore
Data” on page 16-17.

Summary of Contents for KD-150




















































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands