GTD-110/150
Chapter 6
Using the menu
0093151542-06
6-41
(6) Storing
data
Storing MARK / ROUTE / TRACK / DRAWING / OTHER SHIP’S PLOT
1) Move the Joystick up or down to highlight the block number
to be saved. (Figure 6.69)
2) Move the Joystick to the right to enter its setting menu.
3) Enter the file name using the Joystick. Moving the
Joystick right or left selects a digit and up or down to
choose a number. Note that two leading letters are
uniquely specified to the kinds of the data as follows:
MK ***: Used for saving a mark.
RT ***: Used for saving a route.
TK *** : Used for saving a track.
DR ***: Used for saving a drawing.
OT *** : Used for saving another ships plot.
For the asterisks (***)space, enter the file number in 3 digits,
from 000 – 399. (Figure 6.70)
4) After the file name entry is finished, press the ENT key
to save the data. When the data is successfully saved, the
message “Data storage complete” will appear.
5) To return to the normal Nav display, press the MENU key 4 times.
Storing SYSTEM
This menu is used to backup the setting environment. Use the following procedure to backup.
(1) Enter the file number in 3 digits to complete the file name.
SYS (Code for system backup)***(3 digits numbers)
(2) After the file name entry, press the ENT key to save the data. The message “Data storage
complete!” will appear.
(3) To return to the normal Nav display, press the MENU key 4 times.
Redoing the file name entry
Press the CANCEL key during the file name entry.
Maximum number of files to be saved
Mark data: 36 files, assuming each file contains one block composed of 1000 points.
Track data: 18 files, assuming each file contains one track composed of 7000 points.
Figure 6.69 MARK STORE MENU
Figure 6.70 Specifying the file name
