GTD-110/150
Chapter 6
Using the menu
0093151542-06
6-3
6.2 MARK BLOCK NUMBER, Setting the start number of the mark block
This function allows assigning the start number of
the mark.
To set:
(1) Press the MENU key and select MARK BLOCK
NUMBER.
(2) Press the Joystick to the right and move the
Joystick.
(3) up or down to select the start number.
(4) Press the ENT key.
6.3 ALARM SETTINGS, Setting the alarm
Using this function you can set up various alarms
such as, ARRIVAL ALARM, POB ALARM, XTE
(Cross Track Error) ALARM, ALARM ZONE. To set
up:
(1) Press the MENU key to display the MENU
display.
(2) Highlight ALARM SETTINGS and press the
Joystick to the right. The ALARM SETTINGS
set up menu will appear. Confirm ARRIVAL
ALARM YES is highlighted. (If NO is
highlighted, press the Joystick to the left to
highlight YES)
(3) Press the Joystick downward to select ARRIVAL ALARM RANGE and press the Joystick to the
right or left to select the alarm range. Press the Joystick downward to select another item and
continue the above Joystick operation to set up each parameter.
6.3.1 ARRIVAL ALARM
This alarm (audio) is activated when own ship enters a preset alarm range
Setting range: 0.05
～
5.00 nm or km
Initial setting: 0.05 nm or km
6.3.2 POB (Person Over Board) alarm
This alarm (audio) is activated when own ship leaves a preset POB alarm range.
Setting range: 0.05
～
5.00 nm or km
Initial setting: 0.05 nm or km
Figure 6.3 Alarm settings menu
Figure 6.2 Mark block starting number
setting menu
