GTD-110/150
Chapter 5
Basic Operation
0093151542-06
5-13
5.6.2 Mark registration for the cursor assigned point
(1) Display the cross cursor by pressing the CUR key.
(2) Assign the mark color by the MARK COLOR switch.
(3) Move the cross cursor by operating the Joystick to cover the point to be registered.
(4) Assign the mark shape by a mark key switch ( , , or ). An assigned mark is registered
on that point.
5.6.3 Erasing a registered mark by color and shape
(1) Delete the cross cursor display by pressing the CUR key.
(2) Press the MARK ERASE key. The MARK ERASE pop up window will appear.
(3) Operate the Joystick in the window to point to the color and shape to be erased. If you wish to
delete all the registered data, point to ALL COLORS and ALL SHAPES.
(4) Press the ENT key. Assigned registered colors and shapes will be deleted.
WARNING
Erased marks cannot be resumed. Take utmost care not to ruin recorded marks.
Figure 5.14 Erasing the registered mark
Mark color identification
Figure 5.13 Mark registration of a cursor assigned point
A triangle mark is registered here