GTD-110/150
Chapter 6
Using the menu
0093151542-06
6-45
Canceling the data erasure
Press the CANCEL key. The screen will return to the previous display.
Prompt messages
If the following messages appear, redo the operation as instructed.
“Please insert User C-Card”
This message indicates that the User C-Card is not inserted or not properly inserted into the card slot.
Reinsert the User C-Card.
6.13.4 FORMAT
Prior to using a User C-Card, you need to format the User C-Card for GTD-110/150 storage application.
Take care not to overwrite any data already stored in the User C-Card by an unintentionally formatting.
Formatting time is about 10 seconds. Use the following procedure to format.
(1) Press the MENU key to open the Main menu.
(2) Move the Joystick up or down to highlight USER C-CARD and press the Joystick to the right. The
USER C-CARD menu will appear. (Figure 6.76)
(3) Move the Joystick up or down to highlight FORMAT
and press the Joystick to the right. The User C-Card
FORMAT menu will appear. (Figure 6.77)
(4) Press the ENT key to start the formatting procedure.
When formatting is complete, the message “User C-Card format complete!” will appear.
(5) To return to the normal Nav display, press the MENU key 3 times.
Figure 6.76 USER C-CARD MENU
Figure 6.77 User C-Card FORMAT MENU
