GTD-110/150
Chapter 5
Basic Operation
0093151542-06
5-23
5.14 Measuring the bearing and distance between two points
(1) Press the CUR key to display the cross cursor
(2) Move the cross cursor using the Joystick on to the
first point and press the ENT key. A pop up window
labeled “POINT TO POINT” will appear at the top
right corner of the screen. (Figure 6.15)
(3)
Move the cross cursor on to the second point and
press the ENT key. The bearing and distance between
two points will be shown in the window at the top right
corner of the screen for 5 seconds. (Figure 6.16)
Figure 5.28 POINT TO POINT
window (1)
Figure 5.29 POINT TO POINT
window (2)
