Chapter 7
GTD-110/150
Route/Mark navigation
7-4
93151542-00
NOTE:
Keying sequence to enter alphabets and numbers are as follows:
7.1.1.3 Specifying a waypoint
a. By latitude and longitude coordinate
(1) Press the Joystick to the left to highlight MARK
NUMBER.
(2) Press the Joystick down to highlight POSITION.
(3) Press the Joystick to the right and highlight Position
in the lat/lon box.
(4) Enter the latitude value at first and then the
longitude.
(5) Press the ENT key to register the waypoint.
(6) Repeat step 1 and step 2 for further waypoint
registrations.
(7) Press the MENU key to fix the entries.
b. By LOP value
(1) Press the Joystick to the left to highlight MARK
NUMBER.
(2) Press the Joystick down to highlight POSITION.
(3) Press the Joystick to the right and highlight Position
in the LOP box.
(4) Enter the LOP value of the point to be registered.
(5) Press the ENT key to register the waypoint.
(6) Repeat step 1 and step 2 for further waypoint
registrations.
(7) Press the MENU key to fix the entries.
(8) Press the MENU key 4 times to return to normal
display.
9 Y Z &
3 G H I
1 A B C
2 D E F
6 P Q R
5 M N O
8 V W X
MEMO
ROUTE
RCL
INFO
4 J K L
7 S T U
0 # - .
ON
OFF
Figure 7.9 Waypoint registration by L/L
Figure 7.9a Waypoint registration by LOP