Kodak DCS 465, User Manual

Page: 147 / 398

. . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Preparing for Use with PC
G
5-47
Example 5: Media Cybernetics HALO Desktop
Imager 2.01.H
Once you have installed the TWAIN driver(s) as described earlier in this
chapter, and are in Windows, you access the driver by following these
steps.
1. Run Media Cybernetics HALO Desktop Imager 2.01.H.
2. Choose S
CAN
on the Media Cybernetics HALO Desktop Imager 2.01.H
F
ILE
menu; the S
CAN
dialog box appears.
3. Click TWAIN S
CANNERS
.
4. Click S
ELECT
; you see the S
ELECT
S
OURCE
dialog box.
5. Click “DCS
XXX
,F
UTURE
D
OMAIN
” or “DCSxxx,ASPI” depending on which
version of the TWAIN driver you installed and want to use. Laptop
users should click the ASPI driver.
6. Click S
ELECT
; you are returned to the S
CAN
dialog box.
NOTE: The choice of source, and other settings you establish while using the
driver, are maintained in a preferences file for the TWAIN-compliant driver;
you do not need to repeat steps 2 through 6 each time you use the driver.
7. Click A
CQUIRE
.
8. Wait as the driver image window appears, then continue at “Updating
Firmware in the DCS 465 Camera Back,” on the next page. That
section shows the driver image window.