Kodak DCS 465, User Manual

Page: 355 / 398

. . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Updating Your Kodak Software Driver
G
A-3
Downloading a Driver from CompuServe
This section assumes that you have an account on CompuServe and that
you are familiar with procedures to initiate and terminate a session on this
network. If you need information on any of these topics, contact
CompuServe at the address provided above.
There are a large number of communications software packages that you
can use to access CompuServe. The instructions below assume that you
are using either the Macintosh or Windows (PC) version of the software
application “CompuServe Information Manager.” If you are not currently
using CompuServe and want to do so, you may wish to obtain and use
this low-cost application which is widely available. If you are using
another software product to access CompuServe, review the steps below;
they provide information on the name and location of the file(s) you will
need to download.
NOTES: The steps below were prepared using CompuServe Information Manager,
Macintosh version 2.1.2 and Windows version 1.0.4. The screens were generated
from the Macintosh computer version; similar screens appear on the PC.
1. Initiate a computer work session and run CompuServe Information
Manager.
2. Follow these steps to enter the K
ODAK
F
ORUM
. (It may have a different
name, for example K
ODAK
CD F
ORUM
.)
A. Choose GO from the S
ERVICES
menu.
B. Type K
ODAK
in the text box.