Kodak DCS 465, User Manual

Page: 269 / 398

. . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Reference — KODAK Driver for Adobe Photoshop (Macintosh) Software
G
10-11
If there is no white or light gray area in the image, take a photo-
graph of a neutral gray or white card (for example KODAK Gray
Cards, Publication No. R-27) under the same lighting conditions
that existed when the image was taken. Click on the preview (or
thumbnail) of this image to set color correction values for those
lighting conditions; then acquire the desired image(s).
N
ONE
Uses a unity gain (“1” is used as the color correction value
for red, green, and blue), for the color correction values
when acquiring the image. This choice may be useful for
images made under unusual lighting conditions when the
other choices do not provide the desired results.
C
OLOR
C
ORRECT
This option affects only color images.
Enhances the color in many images when you acquire the image. (When
“on” an X appears in the check box to the left of this option.) In the rare
case that the acquired image quality is unsatisfactory, return to the driver,
turn this option off and acquire the image again; no color correction will
be applied. The suggested value is “on.”
P
REVIEW
Presents a single, enlarged version of the image — in color on a color
monitor if the image is color — in the driver image window. You can
scroll through images while in preview mode. Data displayed below the
preview image indicate the image number, the current X and Y pixel
location of the crosshair cursor on the preview image, and the red (R),
green (G), and blue (B) values at the current cursor location.
(Refer to “C
LICK
” earlier in this chapter for an explanation of the use of
P
REVIEW
with that feature.)