Kodak DCS 465, User Manual

Page: 222 / 398

. . . . . . . . . . . . . . . . . . . . . . . . . . . . .
9-10

Reference — DCS 465 Camera Back
G
ISO Button and ISO Indicator
You use the ISO button to set the ISO on the camera back.
To use the ISO button, if you are not connected to a computer or the AC
battery charger/adapter, first press the record button to wake the DCS 465
Camera Back. (If you are connected to a computer that is on, or to the AC
battery charger/adapter, the camera back will be awake; you do not need
to press the record button.) Then press ISO once to wake ISO mode. The
characters “ISO” — the ISO indicator — and the current ISO setting
appear on the camera back LCD. Then press ISO again to select another
supported ISO setting.
As long as the characters “ISO” appear on the LCD, you can press the ISO
button again and again to rotate through supported ISO setting. If a single
ISO setting is available, there is no change in the displayed setting when
you press this button. If more than one ISO setting should become avail-
able for your camera back, the ISO indicator cycles to the next supported
ISO.