Kodak DCS 465, User Manual

Page: 250 / 398

. . . . . . . . . . . . . . . . . . . . . . . . . . . . .
9-38

Reference — DCS 465 Camera Back
G
Technique 1: Examine a Test Image
1. Set up the DCS 465 Camera Back to operate while connected to a
computer.
2. Set the lens aperture to its highest f number, to provide for maximum
depth of field.
3. Take a photograph of a plain white object like a clean, white wall.
4. Examine the image on the computer monitor; imperfections in the
image, such as dark clusters or streaks, may indicate a dirty imager.
Technique 2: Visually Inspect the Imager
1. If the DCS 465 Camera Back is connected to your computer, discon-
nect it now as described earlier in this manual.
2. If the AC battery charger/adapter is connected, disconnect it from the
camera back.
3. Lay the DCS 465 Camera Back on its back (the side with the labels
and buttons) on a flat, steady surface.
4. Locate the cleaning materials supplied with the DCS 465 Camera
Back. Included are an electrostatic discharge (ESD) wrist strap, low-