Kodak DCS 465, User Manual

Page: 151 / 398

. . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Preparing for Use with PC
G
5-51
Formatting a PCMCIA Card
This section describes how to format a PCMCIA card, an action you
should take now as you start to use the camera back, and may need to
repeat later on an occasional basis when you want to format another card,
or to reformat a card you have been using with the DCS 465 Camera
Back.
NOTE: To complete these steps, the camera back must be connected to your PC
as described earlier in this chapter. We also assume that one of the software
applications described earlier in this chapter is currently running on your PC, and
that you have accessed the driver image window.
A PCMCIA card used for image storage must be (DOS) formatted with the
DCS 465 Camera Back using the supplied driver as described in this
section.
1. Click the C
ONTROL
P
ANEL
button of the driver image window. You will
see the dialog box below.