manualshive.com logo in svg

Kodak DCS 465, User Manual

Share
Download
Kodak DCS 465 User Manual Download Page 39

.  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .

Introduction

G

2-5

Two controls — one sets the camera back SCSI ID; the other sets the
ISO.

A built-in microphone records sound as “.WAV” files at “radio qual-
ity”— 8-bits, 11 kilohertz, monaural.

Software drivers to move images from the camera back to your
computer. You can also use the drivers to perform self-tests on the
DCS 465 Camera Back from your computer, and to load new firm-
ware into the DCS 465 Camera Back. This last function allows you to
keep the firmware in the camera back up-to-date without sending the
camera back to a service center.

Summary of Contents for DCS 465















































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands