manualshive.com logo in svg

Kodak DCS 465, User Manual

Share
Download
Kodak DCS 465 User Manual Download Page 73

.  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .

Preparing for Use with Mac

G

4-23

Skip the next sections and continue at “Installing the KODAK Driver for
Adobe Photoshop Software (Macintosh) and Calibration File” later in this
chapter.

C. Follow these steps if no external devices are
connected and you are using a Macintosh IIfx
computer.

For this installation you will need to supply:

A second 25-pin to 50-pin SCSI cable (two are needed, but only one
is supplied with the DCS 465 Camera Back).

A black SCSI terminator made especially for the Macintosh IIfx
computer.

A SCSI gender changer.

25-pin Connector

50-pin Connector

Terminator

Gender changer

Summary of Contents for DCS 465















































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands