manualshive.com logo in svg

Kodak DCS 465, User Manual

Share
Download
Kodak DCS 465 User Manual Download Page 125

.  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .

Preparing for Use with PC

G

5-25

7. Attach the supplied 25-pin terminator to the other end of the SCSI

cable and then to the DCS 465 Camera Back.

25-pin Connector

SCSI Port

25-pin Terminator

8. (Optional) Later, to disconnect the camera back from the PC, turn off

the computer and all external SCSI devices. Then restore the SCSI
cables and terminator to the state they were in before the camera back
was connected. Do not leave a SCSI cable with an empty connector
dangling from a SCSI chain.

Skip the next section and continue at “KODAK Drivers for TWAIN-
Compliant PC Applications” later in this chapter.

Summary of Contents for DCS 465















































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands