23
Menu Display
Administrator level:
Enabling / locking functions
Example:
Blocking calibration adjust-
ments for the Operator level
Open the parameter setting menu
Select Administrator level.
Enter passcode (1989).
Select “Sensor SE 740” using arrow
keys, press
enter
to confirm.
Parameter Setting: Locking a Function
Administrator level: Enabling / locking functions for Operator level
Note:
Function check (HOLD) mode active (Setting: BASE module)
Select “Cal preset values” using arrow
keys, “Block” with softkey.
Now, the “Cal preset values” line is
marked with the “lock” icon. This
function cannot be accessed from the
Operator level any more. The softkey
function changes to “Release”.
Open the parameter setting menu
Select Operator level, passcode (1246),
Select “Sensor SE 740”, for example.
Now, the locked function is displayed
in gray and marked with the “lock” icon.
Sensor SE 740 (Administrator)
25.0°C
Return
Sensor data
Cal preset values
82.3% Air
Salinity correction
Messages
Pressure correction
Input filter
Block
Parameter setting (Administrator)
25.0°C
Return
Module FRONT 3400-011
Module BASE 3400-029
82.3% Air
System control
Sensor SE 740 (Administrator)
25.0°C
Return
Sensor data
Cal preset values
82.3% Air
Salinity correction
Messages
Pressure correction
Input filter
Release
Sensor SE 740
25.0°C
Return
Sensor data
Cal preset values
82.3% Air
Input filter
Salinity correction
Messages
Pressure correction
Module PH 3400-035
Module LDO 3400-170
Sensor SE 740
N
ot
e:
T
he displa
y ma
y v
ar
y depending on the devic
e v
ersion.
