21
Parameter Setting
CAUTION!
Incorrect parameter setting, calibration or adjustment may result in incorrect
measurements being recorded. Protos must therefore be commissioned by a
system specialist, all its parameters must be set, and it must be fully adjusted.
NOTICE!
The "function check” (HOLD) mode is active during parameter setting.
The behavior of the current outputs depends on the parameter setting, i.e.,
they may be frozen at the last measurement or set to a fixed value. The red
"Alarm” LED blinks.
Measurement operations must not be carried out while the Protos is in
the function check (HOLD) mode, as this may put the user at risk due to
unexpected system behavior.
Menu Display
Action
Open the Parameter Setting menu
From the measuring mode:
Press
menu
key to select menu.
Select parameter setting using arrow
keys, press
enter
to confirm
Menu Selection
Back
Parameter Setting
Lingua
