KLS Martin CEMOR, Mounting Instructions

Page: 79 / 84

Mounting Instructions
0B
CEMOR Monitor Suspension System
Revision 1 79
20 Permissible Third-Party Adaptions
Approved third-party end devices with CE mark
Flat screens
The CEMOR is combined with flat screens from third-party manufacturers. To prevent
dangerous overload, which can lead to a failure or collapse of the pendant system, the
maximum load-bearing capacity in the technical specifications of the suspension arm system,
the maximum load-bearing capacity (payload) indicated on the rating plate and the maximum
loading capacity (payload) of the VESA bracket must be adhered to, see section 19.2
“Technical Data”, page 77.
The party placing the appliance into operation is responsible for the validation of the overall
system. A conformity assessment procedure shall be executed if required and a declaration in
accordance with Article 12 of 93/42/EEC (Medical Device Directive, MDD) shall be provided.
Read the Mounting Instructions of the flat screens provided by the third-party manufacturer,
and in particular the relevant pages with information on the installation of the appliance.