KLS Martin CEMOR, Mounting Instructions

Page: 77 / 84

Mounting Instructions
0B
CEMOR Monitor Suspension System
Revision 1 77
19.2 Technical Data
Dead Weight
Designation Dead weight
CEMOR
The dead weight of the CEMOR is indicated on
the rating plate, see section 4.1, page 25.
1D VESA bracket, 1D VESA bracket Cockpit View 0.14 kg
2D VESA bracket 0.63 kg
3D VESA bracket 2.0 kg
VESA bracket for large screens 2 x 0.55 kg
VESA bracket rear 0.15 kg
Maximum Load-Bearing Capacity (Payload) on the CEMOR
CEMOR is suitable and approved for the maximum load-bearing capacity (payload) indicated
on the rating plate, see section 8 “Reading and Checking the Approved Maximum Load-Bearing
capacity (Payload)”, page 36.
If you cannot clearly determine the maximum loading capacity (payload) specified on the
rating plate, contact Martin Service Center.
Maximum load-bearing capacity (payload) of the VESA brackets
Designation Maximum load-bearing capacity (payload)
1D VESA bracket, 1D VESA bracket Cockpit View
2D VESA bracket, 3D VESA bracket,
VESA bracket for large screens
20 kg for each VESA bracket
VESA bracket rear 75 kg for each VESA bracket, total of 150 kg