KLS Martin CEMOR, Mounting Instructions

Page: 45 / 84

Mounting Instructions
0B
CEMOR Monitor Suspension System
Revision 1 45
11.5 Aligning and Securing the TFT Screens
• Align all TFT screens, see
recommendations in section 10
“Mounting Recommendations for VESA
Brackets”, page 39.
•
Press 1 locking rivet each into the
locking discs on the 2 ends of each
mounting rail
.
The 2 locking rivets protect the
TFT screens from falling off sidewards.
Make sure the locking rivets are safely in
place:
• The locking rivets must be securely
pressed into the locking discs .
Fig. 11-5: Aligning and securing the TFT screens
•
For each 1D VESA mount/1D VESA mount Cockpit View , tighten 2 Allen cylinder screws
M4 x 20 mm DIN 912.
The 2 cylinder screws protect the TFT screens from falling off sidewards.
Make sure the 1D VESA mount/1D VESA mount Cockpit View
are safely in place on the
mounting rail :
•
The 1D VESA mount/1D VESA mount Cockpit View must be screwed against the
mounting rail using the 2 cylinder screws .
•
The 2 cylinder screws must be tightened.