KLS Martin CEMOR, Mounting Instructions

Page: 80 / 84

Mounting Instructions
0B
CEMOR Monitor Suspension System
80 Revision 1
21 Inspection Plan
CEMOR with IDP
Supplier:
Installation date:
Serial no.:
Operator serial number:
Device location:
Notice
•
This inspection plan is valid only in connection with the Mounting Instructions and the
Instructions for Use, which must be referred to as supplement to the inspections.
• Comply with the inspection intervals.
Have the suspension arm system inspected according to the items and at the
intervals specified below by Gebrüder Martin or service technicians authorized by
Gebrüder Martin:
Visual inspection – Perform annually Not OK OK
•
The parts of the suspension arm are not deformed or damaged (scratches,
cracks, etc.)*
• The paint of the system is undamaged*
•
The plastic covers are present and positioned correctly*
• All rating plates and labels are provided and clearly legible
•
All the fastening screws of the canopy are provided and firmly installed
•
Collision damage – all welds are free of cracks**
Function check – Perform annually Not OK OK
• The suspension arm system is securely positioned; adjust the swivel stops
if necessary
•
At least 1 swivel stop is set at every pivot point and is correctly installed
and effective**
•
The extension arms can be easily positioned when the pneumatic and
electromagnetic brakes are released
• The brake valves can be bled and closed correctly, the brake buttons
return smoothly to their initial position***
•
Mechanical brakes (friction brakes) adjusted correctly, readjust if
necessary***
•
The suspension arm system latches in each selected position**
•
The upper vertical lift functions and is set correctly, readjust if necessary**
• The lower vertical lift functions and is set correctly, readjust if necessary**