KLS Martin CEMOR, Mounting Instructions

Page: 51 / 84

Mounting Instructions
0B
CEMOR Monitor Suspension System
Revision 1 51
13.3 Preparing the Installation
• Place 2 slide rails on the
3 hexagon screws M8 x 60 mm
ISO 4017 so that the wide side
points away from the 3D VESA mount
.
• In case of differing TFT screens with a
depth difference of more than 15 mm,
the slide rails can be mounted with
the wide side pointed towards the 3D
VESA mount
so that the depth
differences of the TFT screens can be
compensated.
Fig. 13-3: Preparing the installation of the 3D VESA mount
•
Hang the 3D VESA mount on the mounting rail .
•
If necessary, adjust the distance of the optional handle on the bottom/rear or the
handle on the side , see section 9 “Adjusting the Handles on the Bottom/Rear or the
Side”, page 38.
13.4 Mounting the TFT Screen on the VESA Mount
•
Hold the TFT screen against the 3D VESA
mount
at the desired height (see
recommendations in section 10 “Mounting
Recommendations for VESA Brackets”,
page 39) and mark the drill holes on the
3D VESA mount
.
Fig. 13-4: Mounting the TFT screen on the VESA mount